VU+ Solo 4K NO Blind Scan?
↧
VU+ Solo 4K Blind Scan
↧
uClan Ustym 4K PRO (U2C Ustym 4K PRO)
uClan Ustym 4K PRO (U2C Ustym 4K PRO) same with Octagon SF8008
next Hisilicon shit box from ukraina!:D
Price; 2300 грн > > 70uro:eek:
https://www.youtube.com/watch?v=uTMd1dncRYs
next Hisilicon shit box from ukraina!:D
Price; 2300 грн > > 70uro:eek:
https://www.youtube.com/watch?v=uTMd1dncRYs
↧
↧
OCTAGON SF8008 4K UHD E2 DVB-S2X & DVB-C / T2
Hi
I like very much this decoder, I would like to ask you 2 question ;:
1> Can Octagon sf 8008 decrypt the multistream at 5 west ?
2> Is possible to see the feed in 4:2:2 at 7 east ?
Thanks a lot
Paul italy
I like very much this decoder, I would like to ask you 2 question ;:
1> Can Octagon sf 8008 decrypt the multistream at 5 west ?
2> Is possible to see the feed in 4:2:2 at 7 east ?
Thanks a lot
Paul italy
↧
Non posso fare il flash via web browser
Salve
Ho un DB 800 HD originale.
Ho provato a fare il flash tramite il web browser e posso collegarmi facilmente al mio DB, posso caricare la image ma quando faccio click su "flash" non succede nulla!
Ho usato questo metodo in passato senza problemi.
Ho provato a usare firefox e IE and non cambia nulla.
Suggerimenti per favore?
Grazie
Ho un DB 800 HD originale.
Ho provato a fare il flash tramite il web browser e posso collegarmi facilmente al mio DB, posso caricare la image ma quando faccio click su "flash" non succede nulla!
Ho usato questo metodo in passato senza problemi.
Ho provato a usare firefox e IE and non cambia nulla.
Suggerimenti per favore?
Grazie
↧
hello Sat Universe family
Thank you for all your shares.:thum::thum:
↧
↧
TBS 6903 & Eumetsat TELLICAST Multicast Distribution System
Does sb know Eumetsat system is working nowadays?
I can't get ******-***** at host_key_4.
![]()
The pdf file writes check EKU properties (see EKU guide) but I can't find EKU guide.
I can't get ******-***** at host_key_4.
The pdf file writes check EKU properties (see EKU guide) but I can't find EKU guide.
↧
Hello
Hello
It is a pleasure indeed be part of this 'household of ideas'.
Thank you for everything.:thum:
It is a pleasure indeed be part of this 'household of ideas'.
Thank you for everything.:thum:
↧
BLACK FHD Skin PLi by Mercus34
SKIN BLACK FHD PLi v1.5 by Mercus34
![]()
changes in skin version 1.5
> added two new infobars with animations under zzpicon and xpicon FILM. Infobars are selected in userskin
Specially prepared picony DOWNLOAD we put in the folder: / media / usb / animatedZZPicons
> rebuilt in the main skin secondinfobar with information about sunrise and sunset
Installation instructions skina
1. Upload the downloaded file BLACK_FHD_PLi.tar.gz to / tmp
2. Run the console and enter commands (after each line enter)
3. Choose the skin in the decoder menu and restart the GUI.
changes in skin version 1.5
> added two new infobars with animations under zzpicon and xpicon FILM. Infobars are selected in userskin
Specially prepared picony DOWNLOAD we put in the folder: / media / usb / animatedZZPicons
> rebuilt in the main skin secondinfobar with information about sunrise and sunset
Installation instructions skina
1. Upload the downloaded file BLACK_FHD_PLi.tar.gz to / tmp
2. Run the console and enter commands (after each line enter)
Code:
/bin/tar -xzvf /tmp/*.tar.gz -C /
rm -fr /tmp/*.tar.gz3. Choose the skin in the decoder menu and restart the GUI.
↧
DM900UHD Crash on Channelchange
Hello,
Can anybody help please, when changing channels with my dm900 it often happens that it crashes and restarts, also it happens sometime when I configure the tuner or installing new satellites and when searching for channels.
Have the following images installed:
Merlin-OE_25-dm900 (flash)
Gemini-4-dm900 (Barry Allan 12.72)
Oozoon-image-deb-dm900 (B.A)
TSimage-5-dm900 (B.A)
Plugins:
B.A.12.72
TS panel 8.0
Dbackup 0.94
It is the same story an all images, have tried several configurations on the tuner setup, as well as several different skins but non seems to correct the problem. Have also tried different satellite.xml files but to no wail, still the same.
Have no problem on my dm800, dm600, dm7020, all running fine, so there is for sure no problem with the motorized disk or the disk setup. Only dm900 gives me the mentioned problem.
Have a crashreport.log, but unfortunately I am not yet allowed to add attachments so I can not enclose said file, and I'm not that familiar with Linus so I can understand how to read the log, and find out exactly what the problem is, but hope that somebody on this fine forum can assist me, and revert with some information what I should look for in the crashreport.log, and give me some kind of hint on how to solve said problem.
Thanks in advance and have a good day.
Can anybody help please, when changing channels with my dm900 it often happens that it crashes and restarts, also it happens sometime when I configure the tuner or installing new satellites and when searching for channels.
Have the following images installed:
Merlin-OE_25-dm900 (flash)
Gemini-4-dm900 (Barry Allan 12.72)
Oozoon-image-deb-dm900 (B.A)
TSimage-5-dm900 (B.A)
Plugins:
B.A.12.72
TS panel 8.0
Dbackup 0.94
It is the same story an all images, have tried several configurations on the tuner setup, as well as several different skins but non seems to correct the problem. Have also tried different satellite.xml files but to no wail, still the same.
Have no problem on my dm800, dm600, dm7020, all running fine, so there is for sure no problem with the motorized disk or the disk setup. Only dm900 gives me the mentioned problem.
Have a crashreport.log, but unfortunately I am not yet allowed to add attachments so I can not enclose said file, and I'm not that familiar with Linus so I can understand how to read the log, and find out exactly what the problem is, but hope that somebody on this fine forum can assist me, and revert with some information what I should look for in the crashreport.log, and give me some kind of hint on how to solve said problem.
Thanks in advance and have a good day.
↧
↧
Hello
Hello I´m new in a forum. I enjoy very much!
Thanks
Thanks
↧
Hello
Hello everybody,
I've just found this wonderful forum.
Thank you for your precious work.
imopeeen
I've just found this wonderful forum.
Thank you for your precious work.
imopeeen
↧
Persian Empire images
This is not a new image, but it proved hard to locate any working download links for this image.
I did find this version, which I made available for download here:
Persian Empite RC7 r166
There is released at least two more recent versions, but I found no working link for these, r175 and r182.
If anybody have these stored somewhere, please upload them and share a link.
I did test this image today because I am looking for an image that does work well for recording.
There are a few things that is not working, and that is why I would like to test the more recent versions.
- Wifi seemes buggy. It found my network and I set it up with WPA2 encrytion and activated it. It did fail to perform the network test.
This is not a big problem for me since I can use LAN.
- CIFS does not work. Cifs filesystem seem to be installed, but it fail when I modprobe it. Because of this I am not able to mount my network disk, and this is a major problem for me.
On the positive side, recording from encrypted TV channels did work, and I can play it back without crashing.
One one occasion I experienced that the tv image freezed while recording, but the recording itself was ok anyway.
Timeshift is supported, but it does seem buggy aand might cause you to restart the box.
Also, the update servers / repository servers are not working, so it is hard to install updates and extra modules. Perhaps
modules from other images on kernel 3.9.2 can be used?
Softcams are supposed to be downloaded from the software manager panel, but this also seem offline, so cam must be installed manually.
It was quite easy to install oscam though, just copy the binary to /usr/camd and chmod it 755. Also copy your configfiles to /usr/keys.
(acually I did copy then also to /etc/tuxbox/config, so I am not 100% sure where the cam reads them from)
I did find this version, which I made available for download here:
Persian Empite RC7 r166
There is released at least two more recent versions, but I found no working link for these, r175 and r182.
If anybody have these stored somewhere, please upload them and share a link.
I did test this image today because I am looking for an image that does work well for recording.
There are a few things that is not working, and that is why I would like to test the more recent versions.
- Wifi seemes buggy. It found my network and I set it up with WPA2 encrytion and activated it. It did fail to perform the network test.
This is not a big problem for me since I can use LAN.
- CIFS does not work. Cifs filesystem seem to be installed, but it fail when I modprobe it. Because of this I am not able to mount my network disk, and this is a major problem for me.
On the positive side, recording from encrypted TV channels did work, and I can play it back without crashing.
One one occasion I experienced that the tv image freezed while recording, but the recording itself was ok anyway.
Timeshift is supported, but it does seem buggy aand might cause you to restart the box.
Also, the update servers / repository servers are not working, so it is hard to install updates and extra modules. Perhaps
modules from other images on kernel 3.9.2 can be used?
Softcams are supposed to be downloaded from the software manager panel, but this also seem offline, so cam must be installed manually.
It was quite easy to install oscam though, just copy the binary to /usr/camd and chmod it 755. Also copy your configfiles to /usr/keys.
(acually I did copy then also to /etc/tuxbox/config, so I am not 100% sure where the cam reads them from)
↧
Salut!
Sant nou pe acest forum.Multumesc mult ca am fost primit.
↧
↧
TM-6800 HD Super ON /OFF stuck
Hi everyone, I have TM-6800 HD Super, when I switched ON it's work and after a few seconds switched off (ON and OFF cycle)
So, guys any advice on how to solve this issue.
So, guys any advice on how to solve this issue.
↧
Oscam emu with powervu fixed- arm - mips
Oscam emu with powervu fixed- arm - mips
Try and write comments:thum:
Only binary files
pls backup your old oscam and use this file
Try and write comments:thum:
Only binary files
pls backup your old oscam and use this file
↧
Novato
Hola a todos. Soy de Granada, Spain
↧
Presentación
Hola a todos, soy de España.
Un saludo.:thum:
Un saludo.:thum:
↧
↧
Oscam for GX-CHIP
Please is possible to have updated revision of Oscam-emu for gx chip?
Please OSCam svn11.432 Emu -r772
Thanks in advance
Please OSCam svn11.432 Emu -r772
Thanks in advance
↧
New Octagon SF8008 limited stock available now! Only £109!
New amazing spec Octagon SF8008
LIMITED STOCK AVAILABLE NOW!
CLICK HERE TO ORDER YOURS!
Two built in tuners, DVB-S2X and Hybrid DVB-C/T2.
Quad core Hisilicon CPU 15000 DMIPS.
1GB DDR4 RAM + 8GB eMMC Flash.
Built in WiFi.
Support for Kodi plugin with hardware playback and Stalker plugin.
The Octagon SF8008 is the first Enigma 2 receiver to support Kodi Hardware playback via Kodi's own media player.
[video=youtube_share;2e86H3PSTgk]https://youtu.be/2e86H3PSTgk[/video]
↧
TVManager
tvManager Cam manager Plugin
![]()
* replaces the cbManager: change server for necessary addon
* replaces the cbManager: change server for necessary addon
↧