↧
[OE2.6] Newnigma2 DreamONE UltraHD
↧
Hi everyone
I have been in this forum since 2013, but this is my first post. So I wanted to say hi.
Just to my collection outside of Vu UNO he joined octagom SF8008, so I will definitely have some questions.
I greet everyone!
Just to my collection outside of Vu UNO he joined octagom SF8008, so I will definitely have some questions.
I greet everyone!
↧
↧
Being new
Hello everyone - On VU+ uno 4k and looking for light on sky.de
↧
please help bulsatcom and powervu
Hello
I want some help
I have a local map of bulsatcom and osam 11522-722 emu
I have settings for auto-update of encoding
I open the AVN and SIS channels at 4.8
The problem is that when I open the channel I stop updating my map ...
when I put the update settings on the map, they open AFN, but they stop my Channels 4.8
here are the settings in both versions
with this card being updated, but only AFN runs without the other channels
[global]
disablelog = 1
logfile = stdout; /tmp/oscam.log
pidfile = /var/run/oscam.pid
clienttimeout = 6900
fallbacktimeout = 4900
clientmaxidle = 0
bindwait = 1800
nice = -1
maxlogsize = 128
waitforcards = 0
waitforcards_extra_delay = 1900
preferlocalcards = 1
readerrestartseconds = 2300
dropdups = 1
block_same_ip = 0
block_same_name = 0
emmlogdir = / var / log /
failbantime = 60
failbancount = 10
[cache]
delay = 1
max_time = 11
[streamrelay]
stream_ecm_delay = 50
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = Receiver
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
and in this way everything goes without updating the bullscat card
[global]
disablelog = 1
logfile = stdout; /tmp/oscam.log
pidfile = /var/run/oscam.pid
clienttimeout = 6900
fallbacktimeout = 4900
clientmaxidle = 0
bindwait = 1800
nice = -1
maxlogsize = 128
waitforcards = 0
waitforcards_extra_delay = 1900
preferlocalcards = 1
readerrestartseconds = 2300
dropdups = 1
block_same_ip = 0
block_same_name = 0
emmlogdir = / var / log /
failbantime = 60
failbancount = 10
[cache]
delay = 1
max_time = 11
[newcamd]
port = yay @ 5581: 000000; yyy @ 4AEE: 000000
key = 0102030405060708091011121314
[streamrelay]
stream_ecm_delay = 50
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
why is it so ....
__________________
I want some help
I have a local map of bulsatcom and osam 11522-722 emu
I have settings for auto-update of encoding
I open the AVN and SIS channels at 4.8
The problem is that when I open the channel I stop updating my map ...
when I put the update settings on the map, they open AFN, but they stop my Channels 4.8
here are the settings in both versions
with this card being updated, but only AFN runs without the other channels
[global]
disablelog = 1
logfile = stdout; /tmp/oscam.log
pidfile = /var/run/oscam.pid
clienttimeout = 6900
fallbacktimeout = 4900
clientmaxidle = 0
bindwait = 1800
nice = -1
maxlogsize = 128
waitforcards = 0
waitforcards_extra_delay = 1900
preferlocalcards = 1
readerrestartseconds = 2300
dropdups = 1
block_same_ip = 0
block_same_name = 0
emmlogdir = / var / log /
failbantime = 60
failbancount = 10
[cache]
delay = 1
max_time = 11
[streamrelay]
stream_ecm_delay = 50
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = Receiver
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
and in this way everything goes without updating the bullscat card
[global]
disablelog = 1
logfile = stdout; /tmp/oscam.log
pidfile = /var/run/oscam.pid
clienttimeout = 6900
fallbacktimeout = 4900
clientmaxidle = 0
bindwait = 1800
nice = -1
maxlogsize = 128
waitforcards = 0
waitforcards_extra_delay = 1900
preferlocalcards = 1
readerrestartseconds = 2300
dropdups = 1
block_same_ip = 0
block_same_name = 0
emmlogdir = / var / log /
failbantime = 60
failbancount = 10
[cache]
delay = 1
max_time = 11
[newcamd]
port = yay @ 5581: 000000; yyy @ 4AEE: 000000
key = 0102030405060708091011121314
[streamrelay]
stream_ecm_delay = 50
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
delayer = 60
user = dvbapi
read_sdt = 1
extended_cw_api = 2
why is it so ....
__________________
↧
28E ITV HD
Hi is anybody having pobs with ITV ON 11097v 23000 and 11053 v 23000 locking up and freezing or is it my box !
↧
↧
Emulatore per TVSAT
Sera a tutti,
qualche giorno fa si mi è impallato il dec. un vecchietto clone dm800hdse.
Ho reinstallato la Dream Elite 4.0 messo i setting e installato la pennetta per dtt di sky. Funzia.
Non riescoa veneirne fuori con una cam adeguata che mi faccia vedere tvsat.
Provato varie versioni di ccam 2.3.0 e scam 3.60 però sempre buio.
Forse mi sfugge qualcosa.
So solo che purtroppo ho perso la mano con ste cose e non ne vengo fuori. Se qualcuno mi aiuta. Grazie
qualche giorno fa si mi è impallato il dec. un vecchietto clone dm800hdse.
Ho reinstallato la Dream Elite 4.0 messo i setting e installato la pennetta per dtt di sky. Funzia.
Non riescoa veneirne fuori con una cam adeguata che mi faccia vedere tvsat.
Provato varie versioni di ccam 2.3.0 e scam 3.60 però sempre buio.
Forse mi sfugge qualcosa.
So solo che purtroppo ho perso la mano con ste cose e non ne vengo fuori. Se qualcuno mi aiuta. Grazie
↧
Seeking advice
Hi everyone:
I am new to this forum and seeking advice from expertst about searching updated BISS keys especially for Sports channel currently broadcasting ICC World Cup 2019 :)
Many thanks.
I am new to this forum and seeking advice from expertst about searching updated BISS keys especially for Sports channel currently broadcasting ICC World Cup 2019 :)
Many thanks.
↧
FiFa world Copa Africa (egipt 2019) 7E
FiFa world Copa Africa (egipt 2019) 7E
ISB-Service 1A/2A/3A/4A
EutelSat 7A@(7,0E)
Frq:12689V28500
![]()
ISB-Service 1A
Biss:2445A50E6A2F7B14
![]()
ISB-Service 2A
Biss:DFC47B1E31C34A3E
![]()
ISB-Service 3A
Biss:0000000000000000
![]()
ISB-Sevice 4A
Biss:73CDFD3DB22624FC
![]()
ISB-Service 1A/2A/3A/4A
EutelSat 7A@(7,0E)
Frq:12689V28500
ISB-Service 1A
Biss:2445A50E6A2F7B14
ISB-Service 2A
Biss:DFC47B1E31C34A3E
ISB-Service 3A
Biss:0000000000000000
ISB-Sevice 4A
Biss:73CDFD3DB22624FC
↧
freezing on body in balance
Hello friends. I have a cccam account and I do not freeze on any channels, but I'm freezing in the body in balance channel on the eutelsat16 satellite. And the oscam version is 11523 and stapi. pls Help me
oscam.conf
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 1
preferlocalcards = 1
maxlogsize = 1024
block_same_ip = 0
block_same_name = 0
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 09c4:000000;098c:000000;098d:000000;0500:030b00;0500:50f000; 0B00:000000
[cccam]
port =
nodeid = 24D5EF28108C14E0
version = 2.3.0
reshare = 0
#reshare_mode = 0
#stealth = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 5
request_mode = 1
delayer = 60
user = root
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = duckbox
[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
monlevel = 4
hideclient_to = 0
[webif]
httpport = 8888
httprefresh = 5
httphideidleclients = 0
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 0
http_status_log
-------------------------------------------------
oscam.dvbapi
S: PTI pmt1_1.tmp
S: PTI pmt1_2.tmp
S: PTI pmt1_3.tmp
S: PTI1 pmt2_1.tmp
S: PTI1 pmt2_2.tmp
S: PTI1 pmt2_3.tmp
S: PTI2 pmt3_1.tmp
P: 0E00:000000 # PowerVU
P: 1010:000000 # Tandberg
P: 0B00:000000
------------------------------------------------
oscam.server
[reader]
label = sat3
enable = 1
protocol = cccam
device = 3.dfrdtfedt,78575
user = fgdgdfgd
password = 45745
group = 1
cccversion = 2.3.2
inactivitytimeout = 30
ccckeepalive = 1
audisabled = 1
disablecrccws = 2
dropbadcws = 1
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000 000;0E00:000000;1010:000000;1801:000000,001101,002111,007301 ;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000 FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011, 000014,0000FE
-------------------------------------------------
oscam.user
[account]
user = root
pwd = root
au = 1
group = 1
oscam.conf
[global]
logfile = /tmp/oscam.log
nice = -1
waitforcards = 1
preferlocalcards = 1
maxlogsize = 1024
block_same_ip = 0
block_same_name = 0
ecmfmt = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws_only_for = 09c4:000000;098c:000000;098d:000000;0500:030b00;0500:50f000; 0B00:000000
[cccam]
port =
nodeid = 24D5EF28108C14E0
version = 2.3.0
reshare = 0
#reshare_mode = 0
#stealth = 1
[streamrelay]
stream_relay_enabled = 0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 5
request_mode = 1
delayer = 60
user = root
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = duckbox
[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
monlevel = 4
hideclient_to = 0
[webif]
httpport = 8888
httprefresh = 5
httphideidleclients = 0
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowreaderinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 0
http_status_log
-------------------------------------------------
oscam.dvbapi
S: PTI pmt1_1.tmp
S: PTI pmt1_2.tmp
S: PTI pmt1_3.tmp
S: PTI1 pmt2_1.tmp
S: PTI1 pmt2_2.tmp
S: PTI1 pmt2_3.tmp
S: PTI2 pmt3_1.tmp
P: 0E00:000000 # PowerVU
P: 1010:000000 # Tandberg
P: 0B00:000000
------------------------------------------------
oscam.server
[reader]
label = sat3
enable = 1
protocol = cccam
device = 3.dfrdtfedt,78575
user = fgdgdfgd
password = 45745
group = 1
cccversion = 2.3.2
inactivitytimeout = 30
ccckeepalive = 1
audisabled = 1
disablecrccws = 2
dropbadcws = 1
[reader]
label = emulator
protocol = emu
device = emulator
disablecrccws_only_for = 0E00:000000
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000 000;0E00:000000;1010:000000;1801:000000,001101,002111,007301 ;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000 FE
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011, 000014,0000FE
-------------------------------------------------
oscam.user
[account]
user = root
pwd = root
au = 1
group = 1
↧
↧
STI71** with 0664
have solution of STI71** with 0664 ? using surflock also
↧
openvision-enigma2-develop-9.1-r4-dm920_web "unofficial-version"
20.06.2019
openvision-enigma2-develop-9.1-r4-dm900_web "unofficial-version"
openvision-enigma2-develop-9.1-r4-dm920_web "unofficial-version"
http://docker9084-env-1161716.paas.l...20.06.2019.zip
openvision-enigma2-develop-9.1-r4-dm900_web "unofficial-version"
openvision-enigma2-develop-9.1-r4-dm920_web "unofficial-version"
http://docker9084-env-1161716.paas.l...20.06.2019.zip
↧
E2istream plugin?
Hy,
Where can I find E2istream plugin for DM525 (because it must be .deb fle not .ipk)...
thx..
Where can I find E2istream plugin for DM525 (because it must be .deb fle not .ipk)...
thx..
↧
create vlc playlists with key bisses inside ?
I would like to create a playlst with various video.ts files for vlc.
These files are all encoded with key biss.
How do I insert the key biss in the .m3u playlist?
Thank you.
example:
<?xml version="1.0" encoding="UTF-8"?>
<playlist xmlns="http://xspf.org/ns/0/" xmlns:vlc="http://www.videolan.org/vlc/playlist/ns/0/" version="1">
<title>Scaletta</title>
<trackList>
<track>
<location>file:///C:/Users/Net/Desktop/VIDEO1.TS.ts</location>
<duration>524089</duration>
<extension application="http://www.videolan.org/vlc/playlist/0">
<vlc:id>0</vlc:id>
<vlc:option>file-caching=5000</vlc:option>
</extension>
</track>
</trackList>
<extension application="http://www.videolan.org/vlc/playlist/0">
<vlc:item tid="0"/>
</extension>
</playlist>
My csa key 1122334455667788
how do i insert my csa key biss?
These files are all encoded with key biss.
How do I insert the key biss in the .m3u playlist?
Thank you.
example:
<?xml version="1.0" encoding="UTF-8"?>
<playlist xmlns="http://xspf.org/ns/0/" xmlns:vlc="http://www.videolan.org/vlc/playlist/ns/0/" version="1">
<title>Scaletta</title>
<trackList>
<track>
<location>file:///C:/Users/Net/Desktop/VIDEO1.TS.ts</location>
<duration>524089</duration>
<extension application="http://www.videolan.org/vlc/playlist/0">
<vlc:id>0</vlc:id>
<vlc:option>file-caching=5000</vlc:option>
</extension>
</track>
</trackList>
<extension application="http://www.videolan.org/vlc/playlist/0">
<vlc:item tid="0"/>
</extension>
</playlist>
My csa key 1122334455667788
how do i insert my csa key biss?
↧
↧
firestick 4k question?.
sorry if i,ve posted in the wrong section,not sure where else to put this.
anyone know if i can view 4.2.2 feeds with a firestick 4k in tv and linked to pc?.
was told the normal firestick struggles with 4.2.2 so be interested to know if anyone has this working or if it can work?.
anyone know if i can view 4.2.2 feeds with a firestick 4k in tv and linked to pc?.
was told the normal firestick struggles with 4.2.2 so be interested to know if anyone has this working or if it can work?.
↧
Future ASTRA satellites?
Hi there,
I'm wondering, that there is still no information about future ASTRA satellites, esp. for 19.2° East. ASTRA 1KR, that was launched in 2006, has almost reached its designated lifetime of 15 years and there's nothing about replacement satellites on the net. Does anyone have some thoughts or information about that?
I'm wondering, that there is still no information about future ASTRA satellites, esp. for 19.2° East. ASTRA 1KR, that was launched in 2006, has almost reached its designated lifetime of 15 years and there's nothing about replacement satellites on the net. Does anyone have some thoughts or information about that?
↧
DM800HDse : OpenVision 9.1 (June 2019)
DM800HDse : OpenVision 9.1 (June 2019)
openvision-9.1-r4-dm800se-201906_Japhar_v6.nfi
![]()
- Openvision develop branch 9.1 - r4 (June 2019)
- GCC 9.1.0
- GStreamer 1.16.0
- Python 2.7.16
- Linux 3.2
- GLIBC 2.29
- OpenSSL 1.1.1c
- Busybox 1.30.1
- Feed server online
- Japhar Sim REQUIRED
MEGA DM800HDse Japhar :
openvision-9.1-r4-dm800se-201906_Japhar_v6.nfi
- Openvision develop branch 9.1 - r4 (June 2019)
- GCC 9.1.0
- GStreamer 1.16.0
- Python 2.7.16
- Linux 3.2
- GLIBC 2.29
- OpenSSL 1.1.1c
- Busybox 1.30.1
- Feed server online
- Japhar Sim REQUIRED
MEGA DM800HDse Japhar :
Code:
https://mega.nz/#!dyJzVQZQ!5XY-xyBGdQUGUpKsn18xtPLh_34zwmQ-5SmnpvlwZYM↧
DM800HDseV2 : OpenVision 9.1 (June 2019)
DM800HDseV2 : OpenVision 9.1 (June 2019)
openvision-enigma2-develop-9.1-r4-dm800sev2_Japhar_v6.nfi
![]()
- secondstage SSL89J (up-to-date Bootloader)
- Openvision develop branch 9.1 - r4 (June 2019)
- GCC 9.1.0
- GStreamer 1.16.0
- Python 2.7.16
- Linux 3.2
- GLIBC 2.29
- OpenSSL 1.1.1c
- Busybox 1.30.1
- Feed server online
- Japhar Sim REQUIRED
MEGA DM800HDseV2 Japhar :
openvision-enigma2-develop-9.1-r4-dm800sev2_Japhar_v6.nfi
- secondstage SSL89J (up-to-date Bootloader)
- Openvision develop branch 9.1 - r4 (June 2019)
- GCC 9.1.0
- GStreamer 1.16.0
- Python 2.7.16
- Linux 3.2
- GLIBC 2.29
- OpenSSL 1.1.1c
- Busybox 1.30.1
- Feed server online
- Japhar Sim REQUIRED
MEGA DM800HDseV2 Japhar :
Code:
https://mega.nz/#!FupRSQTK!GyXiopKV-aeWYgwAMf_nfIOWAtCzv5fErlYL8PNBkKk↧
↧
DM500HD : OpenVision 9.1 (June 2019)
DM500HD : OpenVision 9.1 (June 2019)
openvision-enigma2-develop-9.1-r4-dm500hd_Japhar_v6.nfi
![]()
- Openvision develop branch 9.1 - r4 (June 2019)
- GCC 9.1.0
- GStreamer 1.16.0
- Python 2.7.16
- Linux 3.2
- GLIBC 2.29
- OpenSSL 1.1.1c
- Busybox 1.30.1
- Feed server online
- Japhar Sim REQUIRED
MEGA DM500HD Japhar :
openvision-enigma2-develop-9.1-r4-dm500hd_Japhar_v6.nfi
- Openvision develop branch 9.1 - r4 (June 2019)
- GCC 9.1.0
- GStreamer 1.16.0
- Python 2.7.16
- Linux 3.2
- GLIBC 2.29
- OpenSSL 1.1.1c
- Busybox 1.30.1
- Feed server online
- Japhar Sim REQUIRED
MEGA DM500HD Japhar :
Code:
https://mega.nz/#!RihWAALY!1hcI8cxnkbtJOvc4-ikBNqmK9OPaZsWQxqxEY-yriY8↧
DM900UHD : OpenVision 9.1 (June 2019)
DM900UHD : OpenVision 9.1 (June 2019)
openvision-enigma2-develop-9.1-r4-dm900_Japhar.rootfs.tar.gz
![]()
- Openvision develop branch 9.1 - r4 (June 2019)
- GCC 9.1.0
- GStreamer 1.16.0
- Python 2.7.16
- Linux 3.2
- GLIBC 2.29
- OpenSSL 1.1.1c
- Busybox 1.30.1
- Feed server online
- Japhar Sim REQUIRED
MEGA DM900UHD Japhar :
openvision-enigma2-develop-9.1-r4-dm900_Japhar.rootfs.tar.gz
- Openvision develop branch 9.1 - r4 (June 2019)
- GCC 9.1.0
- GStreamer 1.16.0
- Python 2.7.16
- Linux 3.2
- GLIBC 2.29
- OpenSSL 1.1.1c
- Busybox 1.30.1
- Feed server online
- Japhar Sim REQUIRED
MEGA DM900UHD Japhar :
Code:
https://mega.nz/#!gn4SBAza!krYz13yD35uhLz38Hj4YjFVaq32u8hr6IEWgzC41Bgw↧
purE2 Tool_Kit v0.4a Portable
↧